EnglishEnglish
GL-DY5800V27
Asialeren
8517710000
| Quantity: | |
|---|---|
| PDF Export | |
Electrical Specifications | |
Frequency Range-MHz | 5150-5850 |
Polarization | Vertical |
VSWR | ≤1.5 |
Gain-dBi | 27 |
Horizontal beam width | 6° |
Vertical beam width | 9° |
Front-to-back ratio-dB | ≥25 |
Input Impedance-Ω | 50 |
Maximum input power-W | 100 |
Lightning protection | DC Ground |
Mechanical Specifications | |
Input connector type | N-K |
Dimensions-m | 0.6×0.4 |
Antenna weight-kg | 2.4 |
Reflector material | Aluminum |
Reflecting surface color | Gray |
Mechanical tilt | 0～20° |
Operating temperature | -40°C to + 65 °C |
Rated Wind Velocity-m/s | 60 |
Mounting hardware -mm | φ35～φ50 |
Product Introduction
1. High-performance directional transmission
●27dBi high gain: Enhanced signal focusing capability, suitable for long-distance point-to-point or point-to-●multipoint communication (such as 5.8GHz WLAN/WiFi system).
High front-to-back ratio: Suppress rear interference and improve signal transmission stability.
2. Durable structure and protective design
●Aluminum reflector: Lightweight (only 2.4kg) and corrosion-resistant, suitable for long-term outdoor deployment.
●Anti-aging surface coating (gray): Resist environmental erosion such as ultraviolet rays and rain, and extend service life.
3.Precise polarization and compatibility
●Vertical polarization: Reduce multipath interference and optimize wireless signal quality.
●N-K type interface: Standard N-type female (Female), compatible with mainstream RF device connection requirements.
4. Compact size and easy deployment
0.6×0.4m parabolic design**: Small size, suitable for space-constrained scenarios (such as rooftops and tower installations).
5. Multi-scenario adaptability
Supports **point-to-point (P2P) and point-to-multipoint (P2MP)** networking, widely used in wireless backbone networks, monitoring backhaul, industrial Internet of Things, etc.
FAQ
Q: What frequency bands does this antenna apply to?
A: Optimized for **5.8GHz band**, compatible with WLAN/WiFi protocols such as IEEE 802.11a/n/ac.
Q: How to install to ensure optimal performance?
A: It needs to be precisely aligned with the target device (azimuth and elevation angle). It is recommended to use a bracket to fix it and avoid obstructions, and ground it for lightning protection.
Q: Does high gain (27dBi) mean a wider coverage range?
A: High gain improves signal directivity and is suitable for long-distance directional transmission, but the horizontal coverage angle is narrow and deployment needs to be adjusted according to the scenario.
Q: Does it support waterproof and long-term outdoor use?
A: The aluminum reflective surface and anti-aging coating are corrosion-resistant and UV-resistant, but the interface needs additional waterproof sealing.
Q: What type is the input interface N-K?
A: N-K refers to the standard N-type female connector, which is compatible with the N-type male connector (Male) cable to ensure low-loss connection.
Q: Can it be used for non-WIFI systems (such as 4G/5G)?
A: It is designed for 5.8GHz. If other system frequency bands are close (such as 5GHz band), you can try it, but the performance may not be optimal.
Q: How to keep the reflective surface clean?
A: Wipe the surface dust regularly with a soft cloth to avoid scratches with hard objects. If snow or ice accumulates, it needs to be cleaned in time to prevent signal attenuation.
Electrical Specifications | |
Frequency Range-MHz | 5150-5850 |
Polarization | Vertical |
VSWR | ≤1.5 |
Gain-dBi | 27 |
Horizontal beam width | 6° |
Vertical beam width | 9° |
Front-to-back ratio-dB | ≥25 |
Input Impedance-Ω | 50 |
Maximum input power-W | 100 |
Lightning protection | DC Ground |
Mechanical Specifications | |
Input connector type | N-K |
Dimensions-m | 0.6×0.4 |
Antenna weight-kg | 2.4 |
Reflector material | Aluminum |
Reflecting surface color | Gray |
Mechanical tilt | 0～20° |
Operating temperature | -40°C to + 65 °C |
Rated Wind Velocity-m/s | 60 |
Mounting hardware -mm | φ35～φ50 |
Product Introduction
1. High-performance directional transmission
●27dBi high gain: Enhanced signal focusing capability, suitable for long-distance point-to-point or point-to-●multipoint communication (such as 5.8GHz WLAN/WiFi system).
High front-to-back ratio: Suppress rear interference and improve signal transmission stability.
2. Durable structure and protective design
●Aluminum reflector: Lightweight (only 2.4kg) and corrosion-resistant, suitable for long-term outdoor deployment.
●Anti-aging surface coating (gray): Resist environmental erosion such as ultraviolet rays and rain, and extend service life.
3.Precise polarization and compatibility
●Vertical polarization: Reduce multipath interference and optimize wireless signal quality.
●N-K type interface: Standard N-type female (Female), compatible with mainstream RF device connection requirements.
4. Compact size and easy deployment
0.6×0.4m parabolic design**: Small size, suitable for space-constrained scenarios (such as rooftops and tower installations).
5. Multi-scenario adaptability
Supports **point-to-point (P2P) and point-to-multipoint (P2MP)** networking, widely used in wireless backbone networks, monitoring backhaul, industrial Internet of Things, etc.
FAQ
Q: What frequency bands does this antenna apply to?
A: Optimized for **5.8GHz band**, compatible with WLAN/WiFi protocols such as IEEE 802.11a/n/ac.
Q: How to install to ensure optimal performance?
A: It needs to be precisely aligned with the target device (azimuth and elevation angle). It is recommended to use a bracket to fix it and avoid obstructions, and ground it for lightning protection.
Q: Does high gain (27dBi) mean a wider coverage range?
A: High gain improves signal directivity and is suitable for long-distance directional transmission, but the horizontal coverage angle is narrow and deployment needs to be adjusted according to the scenario.
Q: Does it support waterproof and long-term outdoor use?
A: The aluminum reflective surface and anti-aging coating are corrosion-resistant and UV-resistant, but the interface needs additional waterproof sealing.
Q: What type is the input interface N-K?
A: N-K refers to the standard N-type female connector, which is compatible with the N-type male connector (Male) cable to ensure low-loss connection.
Q: Can it be used for non-WIFI systems (such as 4G/5G)?
A: It is designed for 5.8GHz. If other system frequency bands are close (such as 5GHz band), you can try it, but the performance may not be optimal.
Q: How to keep the reflective surface clean?
A: Wipe the surface dust regularly with a soft cloth to avoid scratches with hard objects. If snow or ice accumulates, it needs to be cleaned in time to prevent signal attenuation.
