HT-CPE303
Asialeren
8517710000
Availability: | |
---|---|
Quantity: | |
PDF Export | |
Router hardware | ||
Chipset | MT7628NN | |
Power input port | DC 12V---1A | |
WAN Port | 1 x RJ45(10BaseT/100BaseTX with Auto-MDIX IEEE 802.3/802.3u) | |
LAN Port | 2 x RJ45(10BaseT/100BaseTX with Auto-MDIX IEEE 802.3/802.3u) | |
WPS/Reset Buttons | Buttons: WPS ,Long press: reset(Used to restore the factory configuration of the router.) | |
Power button | Router's power switch (not required) | |
LED indication | 1,power supply 2.System status 3,WIFI Indication 4,4G:Blue light indicates 4G status 5,WAN Interfaces; 6,LAN1; 7,LAN2; | |
Storage | SDRAM: 64MB Nor Flash: 8MB | |
WIFI Frequency range | FCC: 2412-2462MHz(Ch1-Ch11) ETSI: 2412-2472MHz(Ch1-Ch13) | |
Mobile network frequency | FDD: B1 B3 B5 B8 TDD: B34 B38 B39 B40 B41 WCDMA: B1 B8 | |
Transmission rate | 11n:270/243/216/162/108/81/54/27Mbps 135/121.5/108/81/54/40.5/27/13.5Mbps 130/117/104/78/52/39/26/13Mbps 65/58.5/52/39/26/19.5/13/6.5Mbps | |
11g:54/48/36/24/18/12/9/6M(Adaptive) | ||
11b:11/5.5/2/1M(Adaptive) | ||
Number of working channels | 13 | |
Spread Spectrum Technology | DSSS(Direct Sequence Spread Spectrum) | |
Data modulation method | BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/ 64-QAM) | |
Sensitivity @PER (error packet rate) | 270M:-61dBm@10% PER;130M: -61dBm@10% PER;108M:-61dBm@10% PER;54M:-65dBm@10% PER;11M:-85dBm@8% PER;6M:-88dBm@10% PER;1M:-90dBm@8% PER | |
Transmission distance | Up to 50 meters in the room and up to 200 meters in the outdoors (depending on the environment) | |
RF Power | 11n : 15±dBm; 11g : 17±1dBm; 11b : 19±1dBm(Typical value) | |
LTE related hardware | ||
SIM Card Slot | Rear flip SIM card Slot | |
Antennas | External 4 antenna, corresponding to 4G main antenna, wifi dual antenna | |
Router software features | ||
IP Address | Static or dynamic | |
PPP over Ethernet | YES | |
The maximum number of users | 32 (Simultaneous Internet access) | |
Routing Protocol | Static route, RIP1/RIP2 | |
Configuration & Management | Based on WEB interface management (HTTP) | |
DHCP | Support Server and Client | |
Firewall protection | Built-in NAT firewall |
Product Introduction
High - Speed 4G Connectivity:The HT - CPE303 offers impressive 4G speeds, with download speeds of up to 150 Mbps and upload speeds of up to 50Mbps. This allows for seamless streaming of high - definition videos, fast downloads, and smooth online gaming experiences.
Large - scale Device Support:It can support up to 30 Wi - Fi devices simultaneously. This makes it ideal for households with multiple smart devices, small offices, or shared living spaces where many people need to connect to the internet at the same time.
Easy SIM - based Setup:With its “plug - a - SIM - and - play” feature, no complex configurations are required. Years of field tests ensure compatibility with SIM cards from over 100 countries, providing users with a hassle - free connection process.
Reliable Antenna System:Equipped with two advanced LTE antennas and two WIFI antennas, it ensures stable and efficient connections to all connected devices. The external antennas enhance signal strength and coverage, reducing dead zones and signal interference.
Versatile Router Modes:In addition to its 4G functionality, it has a Wi - Fi router mode. If 4G connection is unavailable, users can simply plug an Ethernet cable into the LAN/WAN port for a reliable backup internet access option.
Home Use:In homes, it can meet the internet needs of the whole family. Family members can stream movies on smart TVs, play online games on gaming consoles, and work or study remotely on laptops, all at the same time, thanks to its high - speed 4G and multi - device support capabilities.
Small Offices:Small businesses can use it to provide internet access for their employees. It supports tasks such as video conferencing, file sharing, and accessing cloud - based business applications, ensuring smooth daily operations.
Travel and Remote Locations:For travelers, whether in RVs, during camping trips, or in remote areas where wired internet is not available, this router can provide a reliable internet connection. It allows users to stay connected with the world, check emails, and use navigation apps on their mobile devices.
Event Venues:At small - scale events like pop - up shops, local fairs, or community gatherings, the router can be used to create a temporary Wi - Fi network. This enables vendors to process payments, and attendees to access event - related information on their smartphones.
Student Accommodation:In dormitories or shared student housing, the router can support multiple students' devices. Students can use it for online classes, researching for assignments, and staying in touch with friends and family.
Q;What is the maximum number of devices that can be connected to the HT - CPE303?
A:The router can support up to 30 Wi - Fi devices simultaneously. However, the actual number may vary depending on the network environment and the type of activities each device is performing.
Q;Do I need to configure the router after inserting the SIM card?
A:No, the HT - CPE303 has a “plug - a - SIM - and - play” feature. After inserting a compatible SIM card, it should be ready to use without additional configuration, thanks to its field - tested compatibility.
Q;What is the difference between LTE TDD and LTE FDD bands?
A:LTE TDD (Time - Division Duplex) and LTE FDD (Frequency - Division Duplex) are different duplexing methods. TDD uses the same frequency for both transmission and reception but in different time slots, while FDD uses separate frequencies for transmission and reception. The HT - CPE303 supports both bands for wider network compatibility.
Q;Can I use the router as a regular Wi - Fi router without a 4G connection?
A:Yes, you can. If a 4G connection is not available, you can plug an Ethernet cable into the LAN/WAN port of the router. It will then function as a regular Wi - Fi router, providing internet access based on the wired connection.
Q;How far can the router's wireless signal reach?
A:The transmission distance is up to 50 meters indoors and up to 200 meters outdoors, but this can vary depending on the environment. Obstacles such as walls, buildings, and other electronic devices can affect the signal range.
Q;What security features does the router have?
A:The router has a built - in NAT firewall for protection. It helps safeguard your network from external threats and unauthorized access, ensuring a secure internet connection for all connected devices.
Q;What is the power input requirement for the HT - CPE303?
A:The power input port of the HT - CPE303 requires DC 12V - 1A. Using the correct power supply is essential for the router's proper functioning and safety.
Router hardware | ||
Chipset | MT7628NN | |
Power input port | DC 12V---1A | |
WAN Port | 1 x RJ45(10BaseT/100BaseTX with Auto-MDIX IEEE 802.3/802.3u) | |
LAN Port | 2 x RJ45(10BaseT/100BaseTX with Auto-MDIX IEEE 802.3/802.3u) | |
WPS/Reset Buttons | Buttons: WPS ,Long press: reset(Used to restore the factory configuration of the router.) | |
Power button | Router's power switch (not required) | |
LED indication | 1,power supply 2.System status 3,WIFI Indication 4,4G:Blue light indicates 4G status 5,WAN Interfaces; 6,LAN1; 7,LAN2; | |
Storage | SDRAM: 64MB Nor Flash: 8MB | |
WIFI Frequency range | FCC: 2412-2462MHz(Ch1-Ch11) ETSI: 2412-2472MHz(Ch1-Ch13) | |
Mobile network frequency | FDD: B1 B3 B5 B8 TDD: B34 B38 B39 B40 B41 WCDMA: B1 B8 | |
Transmission rate | 11n:270/243/216/162/108/81/54/27Mbps 135/121.5/108/81/54/40.5/27/13.5Mbps 130/117/104/78/52/39/26/13Mbps 65/58.5/52/39/26/19.5/13/6.5Mbps | |
11g:54/48/36/24/18/12/9/6M(Adaptive) | ||
11b:11/5.5/2/1M(Adaptive) | ||
Number of working channels | 13 | |
Spread Spectrum Technology | DSSS(Direct Sequence Spread Spectrum) | |
Data modulation method | BPSK, QPSK, CCK and OFDM (BPSK/QPSK/16-QAM/ 64-QAM) | |
Sensitivity @PER (error packet rate) | 270M:-61dBm@10% PER;130M: -61dBm@10% PER;108M:-61dBm@10% PER;54M:-65dBm@10% PER;11M:-85dBm@8% PER;6M:-88dBm@10% PER;1M:-90dBm@8% PER | |
Transmission distance | Up to 50 meters in the room and up to 200 meters in the outdoors (depending on the environment) | |
RF Power | 11n : 15±dBm; 11g : 17±1dBm; 11b : 19±1dBm(Typical value) | |
LTE related hardware | ||
SIM Card Slot | Rear flip SIM card Slot | |
Antennas | External 4 antenna, corresponding to 4G main antenna, wifi dual antenna | |
Router software features | ||
IP Address | Static or dynamic | |
PPP over Ethernet | YES | |
The maximum number of users | 32 (Simultaneous Internet access) | |
Routing Protocol | Static route, RIP1/RIP2 | |
Configuration & Management | Based on WEB interface management (HTTP) | |
DHCP | Support Server and Client | |
Firewall protection | Built-in NAT firewall |
Product Introduction
High - Speed 4G Connectivity:The HT - CPE303 offers impressive 4G speeds, with download speeds of up to 150 Mbps and upload speeds of up to 50Mbps. This allows for seamless streaming of high - definition videos, fast downloads, and smooth online gaming experiences.
Large - scale Device Support:It can support up to 30 Wi - Fi devices simultaneously. This makes it ideal for households with multiple smart devices, small offices, or shared living spaces where many people need to connect to the internet at the same time.
Easy SIM - based Setup:With its “plug - a - SIM - and - play” feature, no complex configurations are required. Years of field tests ensure compatibility with SIM cards from over 100 countries, providing users with a hassle - free connection process.
Reliable Antenna System:Equipped with two advanced LTE antennas and two WIFI antennas, it ensures stable and efficient connections to all connected devices. The external antennas enhance signal strength and coverage, reducing dead zones and signal interference.
Versatile Router Modes:In addition to its 4G functionality, it has a Wi - Fi router mode. If 4G connection is unavailable, users can simply plug an Ethernet cable into the LAN/WAN port for a reliable backup internet access option.
Home Use:In homes, it can meet the internet needs of the whole family. Family members can stream movies on smart TVs, play online games on gaming consoles, and work or study remotely on laptops, all at the same time, thanks to its high - speed 4G and multi - device support capabilities.
Small Offices:Small businesses can use it to provide internet access for their employees. It supports tasks such as video conferencing, file sharing, and accessing cloud - based business applications, ensuring smooth daily operations.
Travel and Remote Locations:For travelers, whether in RVs, during camping trips, or in remote areas where wired internet is not available, this router can provide a reliable internet connection. It allows users to stay connected with the world, check emails, and use navigation apps on their mobile devices.
Event Venues:At small - scale events like pop - up shops, local fairs, or community gatherings, the router can be used to create a temporary Wi - Fi network. This enables vendors to process payments, and attendees to access event - related information on their smartphones.
Student Accommodation:In dormitories or shared student housing, the router can support multiple students' devices. Students can use it for online classes, researching for assignments, and staying in touch with friends and family.
Q;What is the maximum number of devices that can be connected to the HT - CPE303?
A:The router can support up to 30 Wi - Fi devices simultaneously. However, the actual number may vary depending on the network environment and the type of activities each device is performing.
Q;Do I need to configure the router after inserting the SIM card?
A:No, the HT - CPE303 has a “plug - a - SIM - and - play” feature. After inserting a compatible SIM card, it should be ready to use without additional configuration, thanks to its field - tested compatibility.
Q;What is the difference between LTE TDD and LTE FDD bands?
A:LTE TDD (Time - Division Duplex) and LTE FDD (Frequency - Division Duplex) are different duplexing methods. TDD uses the same frequency for both transmission and reception but in different time slots, while FDD uses separate frequencies for transmission and reception. The HT - CPE303 supports both bands for wider network compatibility.
Q;Can I use the router as a regular Wi - Fi router without a 4G connection?
A:Yes, you can. If a 4G connection is not available, you can plug an Ethernet cable into the LAN/WAN port of the router. It will then function as a regular Wi - Fi router, providing internet access based on the wired connection.
Q;How far can the router's wireless signal reach?
A:The transmission distance is up to 50 meters indoors and up to 200 meters outdoors, but this can vary depending on the environment. Obstacles such as walls, buildings, and other electronic devices can affect the signal range.
Q;What security features does the router have?
A:The router has a built - in NAT firewall for protection. It helps safeguard your network from external threats and unauthorized access, ensuring a secure internet connection for all connected devices.
Q;What is the power input requirement for the HT - CPE303?
A:The power input port of the HT - CPE303 requires DC 12V - 1A. Using the correct power supply is essential for the router's proper functioning and safety.