EnglishEnglish
GL009
Asialeren
8517710000
| Quantity: | |
|---|---|
| PDF Export | |
combo gps and 4g antenna
The combo GPS and 4G antenna is a versatile device that combines the functionalities of both GPS and 4G technologies. The GPS antenna has a center frequency of 1575.42±3MHz and a band width of CF±5MHz. It is designed with a right-hand circular polarization (RHCP) and offers a gain of 2dBic at zenith. The V.S.W.R is less than 1.5, ensuring efficient signal transmission. The impedance is 50Ω, and the axial ratio is 3dB at maximum. The LNA (Low Noise Amplifier) has a gain of 28±2dB and a noise figure of less than 1.5dB. The supply voltage ranges from 2.2V to 5V DC, with a current consumption of less than 15mA.
On the other hand, the LTE antenna operates within a frequency range of 698~960MHz/1710~2690MHz. It has a V.S.W.R of less than 3.0 and a linear polarization. The gain is 2dBi, and the impedance is 50Ω. The mechanical specifications include an RG174 cable and various connector options such as SMA, MCX, FAKRA, or others. The radome material is made of ABS, and the mounting method can be adhesive or magnet-based.
In terms of environmental conditions, the combo antenna can operate within a temperature range of -40℃ to +85℃. It is designed to withstand relative humidity levels of up to 95% and has an ingress protection rating of IP66. Additionally, it is environmentally friendly and compliant with ROHS regulations.
Item | Specifications | ||
GPS Antenna | Dielectric Antenna | Center Frequency | 1575.42±3MHz |
Band Width | CF±5MHz | ||
Polarization | RHCP | ||
Gain | 2dBic（Zenith） | ||
V.S.W.R | ＜1.5 | ||
Impedance | 50Ω | ||
Axial Ratio | 3dB（max） | ||
LNA | Gain | 28±2dB | |
Noise Figure | ＜1.5dB | ||
V.S.W.R | ＜2.0 | ||
Supply Voltage | 2.2~5V DC | ||
Current Consumption | ＜15mA | ||
LTE Antenna | Frequency Range | 698~960MHz/1710~2690MHz | |
V.S.W.R（min） | ＜3.0 | ||
Polarization | Linear | ||
Gain | 2dBi | ||
Impedance | 50Ω | ||
Mechanical | Cable | RG174 | |
Connector | SMA/MCX/FAKRA or others | ||
Radome Material | ABS | ||
Mounting Method | Adhesive/Magnet | ||
Environmental | Operating Temperature | -40℃~+85℃ | |
Relative Humidity | Up to 95% | ||
Ingress Protection | IP66 | ||
Vibration | 10 to 55Hz with 1.5mm amplitude 2hours | ||
Environmentally Friendly | ROHS Compliant | ||
combo gps and 4g antenna
The combo GPS and 4G antenna is a versatile device that combines the functionalities of both GPS and 4G technologies. The GPS antenna has a center frequency of 1575.42±3MHz and a band width of CF±5MHz. It is designed with a right-hand circular polarization (RHCP) and offers a gain of 2dBic at zenith. The V.S.W.R is less than 1.5, ensuring efficient signal transmission. The impedance is 50Ω, and the axial ratio is 3dB at maximum. The LNA (Low Noise Amplifier) has a gain of 28±2dB and a noise figure of less than 1.5dB. The supply voltage ranges from 2.2V to 5V DC, with a current consumption of less than 15mA.
On the other hand, the LTE antenna operates within a frequency range of 698~960MHz/1710~2690MHz. It has a V.S.W.R of less than 3.0 and a linear polarization. The gain is 2dBi, and the impedance is 50Ω. The mechanical specifications include an RG174 cable and various connector options such as SMA, MCX, FAKRA, or others. The radome material is made of ABS, and the mounting method can be adhesive or magnet-based.
In terms of environmental conditions, the combo antenna can operate within a temperature range of -40℃ to +85℃. It is designed to withstand relative humidity levels of up to 95% and has an ingress protection rating of IP66. Additionally, it is environmentally friendly and compliant with ROHS regulations.
Item | Specifications | ||
GPS Antenna | Dielectric Antenna | Center Frequency | 1575.42±3MHz |
Band Width | CF±5MHz | ||
Polarization | RHCP | ||
Gain | 2dBic（Zenith） | ||
V.S.W.R | ＜1.5 | ||
Impedance | 50Ω | ||
Axial Ratio | 3dB（max） | ||
LNA | Gain | 28±2dB | |
Noise Figure | ＜1.5dB | ||
V.S.W.R | ＜2.0 | ||
Supply Voltage | 2.2~5V DC | ||
Current Consumption | ＜15mA | ||
LTE Antenna | Frequency Range | 698~960MHz/1710~2690MHz | |
V.S.W.R（min） | ＜3.0 | ||
Polarization | Linear | ||
Gain | 2dBi | ||
Impedance | 50Ω | ||
Mechanical | Cable | RG174 | |
Connector | SMA/MCX/FAKRA or others | ||
Radome Material | ABS | ||
Mounting Method | Adhesive/Magnet | ||
Environmental | Operating Temperature | -40℃~+85℃ | |
Relative Humidity | Up to 95% | ||
Ingress Protection | IP66 | ||
Vibration | 10 to 55Hz with 1.5mm amplitude 2hours | ||
Environmentally Friendly | ROHS Compliant | ||
